LED panel light is unique in design. After the light passing through the guide plate with high transmittance, it forms a homogeneous plane glow, illumination uniformity, light soft, comfortable yet bright, which can relieve eye fatigue. LED panel light is radiation protection. It does not stimulate the skin of pregnant women, the elderly and the children. Due to the wide application of LED panel light, the installation is also slightly different. ENELTEC engineers will give you a detailed description of LED panel light installation in the following.

1, suspended: first fitting the suspension components on the back of LED panel lights, and then connect the lanyard on it. Consumers must pay attention to know clearly whether the suspension components are standard accessories or optional.
2, ceiling: first playing a few screws holes in the ceiling, then mounting the slide-ceiling LED panel light boxes into the ceiling, fixing on three sides. And then slide the panel lights inside, then screw on the fourth side to side like a cage.
3: embedded type discharge: first mounting the sheet metal trough on the ceiling, fixing several outwardly projecting brackets at the back of the panel, and then put the light inside so that the brackets coincide with the sheet metal holder groove in the ceiling, thus being fixed to the ceiling. But for thickness varies with various ceiling, it is necessary to adjust the height of the lamp between the surface and the bracket. Otherwise it will result in the phenomenon of a higher or lower than the ceiling surface.






